Terms and Conditions OF SALE AND MANUFACTURE
1. SCOPE AND PRECEDENCE
1.1 Binding Agreement: These Terms and Conditions (“Agreement”) govern the sale and manufacture of all textile products (“Products”) by (
1.2 Entire Agreement: Subject to Section 1.3, this Agreement constitutes the entire agreement between the parties and supersedes all prior representations, negotiations, understandings, and agreements, whether written or oral. Any email communication sent from a party’s corporate email domain is deemed to be authorised by that party and has the same legal force and effect as a written and signed document.
1.3 Contract Formation: A binding contract is formed only upon the Manufacturer’s written Order Confirmation (which may be issued by email from the Manufacturer’s corporate email domain).
1.4 Variations: This Agreement may only be varied in writing agreed by both parties, including by an exchange of emails sent from each party’s corporate email domain.
1.1 Binding Agreement: These Terms and Conditions (“Agreement”) govern the sale and manufacture of all textile products (“Products”) by (
ABN 97 326 841 352) trading as Apex Towels Centre (“Manufacturer”) to the purchasing organisation (“Client”).1.2 Entire Agreement: Subject to Section 1.3, this Agreement constitutes the entire agreement between the parties and supersedes all prior representations, negotiations, understandings, and agreements, whether written or oral. Any email communication sent from a party’s corporate email domain is deemed to be authorised by that party and has the same legal force and effect as a written and signed document.
1.3 Contract Formation: A binding contract is formed only upon the Manufacturer’s written Order Confirmation (which may be issued by email from the Manufacturer’s corporate email domain).
1.4 Variations: This Agreement may only be varied in writing agreed by both parties, including by an exchange of emails sent from each party’s corporate email domain.
2. PRODUCT CLASSIFICATION
2.1 Stock Products: Standard inventory items produced to Manufacturer’s specifications.
2.2 White Label Products: Existing Manufacturer designs rebranded with Client-provided labels or packaging.
2.3 Private Label Products: Bespoke goods manufactured to Client’s exclusive technical specifications as defined in Section 4.1.
2.1 Stock Products: Standard inventory items produced to Manufacturer’s specifications.
2.2 White Label Products: Existing Manufacturer designs rebranded with Client-provided labels or packaging.
2.3 Private Label Products: Bespoke goods manufactured to Client’s exclusive technical specifications as defined in Section 4.1.
3. PAYMENT TERMS, CREDIT, AND CANCELLATION
3.1 Stock Products (Net 14): Subject to credit approval, invoices for Stock Products are due fourteen (14) calendar days from the invoice date.
3.2 Custom Orders (White & Private Label):
3.1 Stock Products (Net 14): Subject to credit approval, invoices for Stock Products are due fourteen (14) calendar days from the invoice date.
3.2 Custom Orders (White & Private Label):
-
- 3.2.1 A 35% non-refundable deposit is required prior to raw material procurement.
- 3.2.2 The remaining 65% balance (adjusted pro-rata for any quantity variance under Section 4.3) is due prior to dispatch, as defined by the applicable Incoterms in Section 6.1.
3.3 Default and Interest: Late payments accrue interest at 1.5% per month, calculated daily. Manufacturer reserves the right to suspend production or dispatch under Section 4 if any invoice remains unpaid past its due date.
3.4 Retention of Title: Legal and beneficial title to Products remains with the Manufacturer until cleared funds are received in full for all amounts owing by the Client.
3.5 Order Cancellation: Once an Order Confirmation is issued, the Client may not cancel an order without Manufacturer’s prior written consent:
3.4 Retention of Title: Legal and beneficial title to Products remains with the Manufacturer until cleared funds are received in full for all amounts owing by the Client.
3.5 Order Cancellation: Once an Order Confirmation is issued, the Client may not cancel an order without Manufacturer’s prior written consent:
-
- 3.5.1 Stock Products: If Manufacturer agrees to cancel an order for Stock Products prior to dispatch, Client must pay a 15% restocking and administration fee. Orders cannot be cancelled after dispatch.
- 3.5.2 Custom Orders (White & Private Label): If Client cancels a Custom Order (or fails to approve a pre-production sample within thirty (30) days of submission), the 35% deposit is forfeited, and Client must immediately pay for all raw materials procured, work-in-progress, and completed Products up to the date of cancellation.
4. MANUFACTURING AND QUALITY CONTROL
4.1 Technical Specifications: For Private Label orders, Client must provide a complete technical file. Manufacturer is not liable for deviations from specifications not explicitly documented in the Order Confirmation.
4.2 Sample Approval: Mass production commences only upon the Client’s written approval of a pre-production sample. Bulk production must materially conform to this approved sample, subject to Section 4.3.
4.3 Textile Variance: Client acknowledges that industry-standard variances of ±5% in final quantity and minor shade variations (Delta-E) within commercial dye-lot tolerances constitute full performance under this Agreement, and final invoicing will be adjusted pro-rata based on the actual quantity produced and dispatched.
4.4 Tooling and Setup: Client must pay a non-refundable Setup Fee for custom patterns. Tooling paid for by the Client remains Client property and will be stored free of charge by the Manufacturer for twelve (12) months following the last order, after which Manufacturer may charge storage fees or dispose of the tooling upon thirty (30) days’ written notice.
4.1 Technical Specifications: For Private Label orders, Client must provide a complete technical file. Manufacturer is not liable for deviations from specifications not explicitly documented in the Order Confirmation.
4.2 Sample Approval: Mass production commences only upon the Client’s written approval of a pre-production sample. Bulk production must materially conform to this approved sample, subject to Section 4.3.
4.3 Textile Variance: Client acknowledges that industry-standard variances of ±5% in final quantity and minor shade variations (Delta-E) within commercial dye-lot tolerances constitute full performance under this Agreement, and final invoicing will be adjusted pro-rata based on the actual quantity produced and dispatched.
4.4 Tooling and Setup: Client must pay a non-refundable Setup Fee for custom patterns. Tooling paid for by the Client remains Client property and will be stored free of charge by the Manufacturer for twelve (12) months following the last order, after which Manufacturer may charge storage fees or dispose of the tooling upon thirty (30) days’ written notice.
5. INTELLECTUAL PROPERTY AND CONFIDENTIALITY
5.1 IP Warranty: Client warrants that all designs, trademarks, and artwork provided for White Label or Private Label Products do not infringe third-party intellectual property rights.
5.2 Indemnification: Client indemnifies Manufacturer against all claims, losses, damages, and legal costs arising from any third-party IP infringement claim related to Client-provided designs or branding.
5.3 Exclusivity: Manufacturer must not sell the Client’s unique Private Label designs to third parties during the term of this Agreement.
5.4 Confidentiality: Each party must keep confidential all non-public pricing, technical files, and commercial information disclosed by the other party under this Agreement.
5.1 IP Warranty: Client warrants that all designs, trademarks, and artwork provided for White Label or Private Label Products do not infringe third-party intellectual property rights.
5.2 Indemnification: Client indemnifies Manufacturer against all claims, losses, damages, and legal costs arising from any third-party IP infringement claim related to Client-provided designs or branding.
5.3 Exclusivity: Manufacturer must not sell the Client’s unique Private Label designs to third parties during the term of this Agreement.
5.4 Confidentiality: Each party must keep confidential all non-public pricing, technical files, and commercial information disclosed by the other party under this Agreement.
6. DELIVERY, INSPECTION, AND RISK
6.1 Incoterms: Unless otherwise agreed in the Order Confirmation, shipments of Stock Products (Section 2.1) are EXW (Manufacturer’s nominated facility) and shipments of Custom Products (Sections 2.2 and 2.3) are CIF (Client’s nominated port of destination) under Incoterms® 2020. Risk passes to the Client in accordance with the applicable Incoterm.
6.2 Inspection Period: Client must notify Manufacturer of any visible defects or quantity discrepancies in writing within seven (7) business days of receipt. Failure to notify within this period constitutes absolute acceptance of the Products.
6.3 Limitation of Liability: To the maximum extent permitted by law (including the Australian Consumer Law), Manufacturer’s liability for any claim arising under or in connection with this Agreement is strictly limited, at Manufacturer’s option, to the replacement or refund of the defective Products, and all indirect or consequential losses (including loss of profit or business interruption) are expressly excluded.
6.4 Force Majeure: Manufacturer is not liable for any failure or delay in performing its obligations (including manufacturing or delivery timelines) caused by events beyond its reasonable control, including acts of God, extreme weather, pandemics, war, strikes, utility or mill outages, raw material shortages, shipping or port congestion, or customs delays (“Force Majeure Event”). Delivery dates will be extended for the duration of the Force Majeure Event. Nothing in this clause excuses the Client from any payment obligation under this Agreement.
6.1 Incoterms: Unless otherwise agreed in the Order Confirmation, shipments of Stock Products (Section 2.1) are EXW (Manufacturer’s nominated facility) and shipments of Custom Products (Sections 2.2 and 2.3) are CIF (Client’s nominated port of destination) under Incoterms® 2020. Risk passes to the Client in accordance with the applicable Incoterm.
6.2 Inspection Period: Client must notify Manufacturer of any visible defects or quantity discrepancies in writing within seven (7) business days of receipt. Failure to notify within this period constitutes absolute acceptance of the Products.
6.3 Limitation of Liability: To the maximum extent permitted by law (including the Australian Consumer Law), Manufacturer’s liability for any claim arising under or in connection with this Agreement is strictly limited, at Manufacturer’s option, to the replacement or refund of the defective Products, and all indirect or consequential losses (including loss of profit or business interruption) are expressly excluded.
6.4 Force Majeure: Manufacturer is not liable for any failure or delay in performing its obligations (including manufacturing or delivery timelines) caused by events beyond its reasonable control, including acts of God, extreme weather, pandemics, war, strikes, utility or mill outages, raw material shortages, shipping or port congestion, or customs delays (“Force Majeure Event”). Delivery dates will be extended for the duration of the Force Majeure Event. Nothing in this clause excuses the Client from any payment obligation under this Agreement.
7. GOVERNING LAW AND DISPUTES
7.1 Jurisdiction: This Agreement is governed by the laws of South Australia.
7.2 Resolution: Parties must seek resolution via mandatory mediation in Adelaide before initiating litigation in the courts of South Australia.
7.1 Jurisdiction: This Agreement is governed by the laws of South Australia.
7.2 Resolution: Parties must seek resolution via mandatory mediation in Adelaide before initiating litigation in the courts of South Australia.
